MET/CAL Procedure
=============================================================================
INSTRUMENT:            Fluke 6061A:Synthesized RF Signal Generator
DATE:                  12-Jun-96
AUTHOR:                D.C. Bansen
REVISION:              1
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       25
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  HEAD         Preliminary Procedure
  1.002  DISP         The signal generator being tested must be warmed-up
  1.002  DISP         with all covers in place for at least 20 minutes before
  1.002  DISP         starting the performance test.
  1.003  DISP         Connect the system port 1 to the UUT IEEE connector.
  1.004  CALL         Fluke 6061A Sub1
  1.005  CALL         Fluke 6061A Sub2
  1.006  CALL         Fluke 6061A Sub3
  1.007  CALL         Fluke 6061A Sub4
  1.008  CALL         Fluke 6061A Sub5
  1.009  CALL         Fluke 6061A Sub6
  1.010  CALL         Fluke 6061A Sub7
  1.011  DISP         {* This Completes the Verification *}
  1.012  END